Overo® IronSTORM-BY COM

$329.00 Available

GUM3703FEBY
Open Datasheet

Extended temperature DM3730-based Gumstix computer-on-module includes OpenGL and DSP with Texas Instruments' WiLink 8 Bluetooth 4.1 + BLE and 802.11b/g/n wireless communications with Access Point mode.

The Overo range can be manufactured to order with an MOQ of 100 units. Please reach out to us for a volume quotation. sales@gumstix.com.

Overo® IronSTORM-BY COM

Get the best of wireless communications, graphics processing and extended-temperature components with the Overo® IronSTORM-BY computer-on-module. With a DaVinci Digital Video Processor for graphics and featuring access point mode, 802.11b/g/n WiFi and Bluetooth 4.1 with BLE using TI's WiLink 8 wireless module, the Overo® IronSTORM-BY COM has all the features you need for your wireless graphics project.

All Overo COMs are now 256MB RAM and 512MB NAND. All of them are using the new Panasonic 70-pin connector.

More details about the New Connectors are available here.

Product Details & Features

What's Included

Included Components
Spacers (1.5mm 0-80 retaining 48/48) spacers: symmetric 48mil PCB with 1.5mm between
Overo IronSTORM-Y COM (board) with CON084B Overo IronSTORM-Y COM (board) with CON084B

Features

Family Gumstix
Access Point Mode Yes
Bluetooth 4.1+BLE
Board-To-Board Connector AXK870145WG
Camera Connector 27-Pin (OMAP ISP)
Flash Memory (NAND) 512
Graphics Acceleration OpenGL POWER SGX™ Graphics Accelerator
Digital Signal Processor High Performance Image, Video, Audio (IVA2.2™) Accelerator Subsystem
Width 17 mm
Length 58 mm
Performance Up to 2,000 Dhrystone MIPS
Power Management Texas Instruments TPS65950
Processor Texas Instruments DaVinci DM3730 Applications Processor
Processor Architecture ARM Cortex-A8
Processor Base Clock 1 GHz (Recommended @ 800 MHz)
Storage Expansion via microSD Card Slot
Manufacturer Texas Instruments

Details

Key Components
U.FL Antenna with Collar U.FL antenna with collar for Bluetooth and/or 802.11b/g/n wireless communications.
microSD Card Slot An onboard card-slot for system storage expansion using microSD cards. Specs
Texas Instruments TPS65950 Power Management The TPS65950 device is a highly integrated power-management integrated circuit (IC) that supports the power and peripheral requirements of the OMAP3-driven Overo series COMs. Specs
TI WiLink8 WL1831 The certified WiLink 8 module from TI offers high throughput and extended range along with Wi-Fi and Bluetooth coexistence in a power-optimized design. Specs
Texas Instruments DM3730 Applications Processor 1GHz ARM Cortex-A8 DaVinci DM3730 high-performance, extended temperature microprocessor. Includes a 720p HD DSP imaging and video accelerator and PowerVR SGX graphics accelerator with Open GL ES 2.0 and OpenVG support. The DM3730 has been designed to provide best in class ARM and graphics performance while delivering low power consumption.
Mating Connectors
U.FL Connector Attach a U.FL Wi-Fi or Bluetooth antenna (not included) to a Gumstix system with this connector.
Hirose 27-Pin Camera Connector (Overo COMs) Connect a Caspa camera to an Overo COM with this connector (Hirose FH26-27S-0.3SHW) Specs

Software Support

Please read the instructions in the README file carefully before starting. Instructions and functions are explained in the file.

Files that are needed (such as bootloader and operating system) to create a bootable disk image, are available below.

Our Support page links additional resources.

Software Links
2017-10-25/overo/morty/MLO MLO spl file generated by buildbot on 2017-10-25 for overo from morty
2017-10-25/overo/morty/gumstix-console-image-overo.ubi boot/gumstix-console-image-overo.ubi rootfs file generated by buildbot on 2017-10-25 for overo from morty
2017-10-25/overo/morty/README README boot file generated by buildbot on 2017-10-25 for overo from morty
2017-10-25/overo/morty/gumstix-xfce-image-overo.ubi boot/gumstix-xfce-image-overo.ubi rootfs file generated by buildbot on 2017-10-25 for overo from morty
2017-10-25/overo/morty/u-boot.img u-boot.img boot file generated by buildbot on 2017-10-25 for overo from morty
2017-10-25/overo/morty/gumstix-xfce-image-overo.tar.bz2 gumstix-xfce-image-overo.tar.bz2 tar file generated by buildbot on 2017-10-25 for overo from morty